Menu
Call (267) 714-1009
Chimney Parts

Chimney Liner Installation New Hope, PA

A chimney sweep in New Hope can install a new liner in a flue that is unlined, cracked or the wrong size with a liner sized to the appliance and insulated where the system calls for it. Dial (267) 714-1009 to talk with a local chimney pro about relining.

The liner is what smoke travels through on its way out of the house. Without one, heat and acidic condensation attack the masonry, and gaps can let heat or carbon monoxide escape into the home. Some older chimneys were built unlined, and others have clay tiles that have cracked over the decades.

There are a few reasons a chimney gets a new liner. The original clay tiles may be cracked from age, settling or a chimney fire, or the chimney may never have been lined. Installing an insert, stove or high efficiency furnace often means the old flue is the wrong size.

Before relining, the chimney should get a thorough inspection, usually a Level 2 inspection with a camera run up the flue. The inspection tells you whether relining is truly needed and what kind of liner suits the chimney. Seeing the inside of the flue makes the decision much easier.

Chimney Liner Installation is often paired with chimney liner repair and chimney inspection, depending on the cause.

Looking for New Hope chimney liner installation? Call (267) 714-1009 to reach a nearby chimney sweep.

Call now
The process

What happens during a liner installation

A liner has to fit the flue, the appliance and the chimney route.

  1. Camera inspection

    A camera is run through the flue to check the existing tiles, offsets and obstructions. It decides between repair and relining.

  2. Match the appliance

    The liner diameter is matched to the appliance outlet or the fireplace opening, following the manufacturer guidance. The length is measured from the appliance to the top of the chimney.

  3. Clear the path

    Creosote and debris are cleaned out first, and broken tiles may be removed to make room. The path from top to bottom has to be clear.

  4. Install the liner

    A flexible liner is fed down the flue, while rigid sections are joined as they go. Insulating it helps draft and reduces creosote and condensation.

  5. Finish the top

    A tee or connector joins the liner to the appliance, and a top plate seals the crown. A sealed system is the whole point of relining.

  6. Test the draft

    The sweep checks the draft and looks for any leaks. Keep carbon monoxide alarms on every level of the home.

What is included

Types of chimney liners

Liner insulation

An insulation wrap or poured insulation surrounds the liner which improves draft and limits creosote.

Furnace flue liners

A properly sized liner for a water heater left alone after a furnace upgrade to keep combustion gases moving out of the house.

Rigid stainless liners

Straight flues can take rigid stainless pipe for a strong, smooth flue.

Poured liners

Cast in place liners are formed inside the old chimney with a heat resistant mix which suits some older or irregular chimneys.

Flexible stainless liners

Flexible stainless steel liners bend around offsets in the chimney and come in grades matched to the fuel.

Related service

Stainless Steel Chimney Liner New Hope, PA

Stainless steel is the most common material for relining today, because it is strong, resists corrosion and works with wood, gas and oil. Flexible stainless goes around offsets in a chimney, and rigid stainless suits straight runs. The grade of stainless and the wall thickness are matched to the fuel, and systems are tested and listed as complete kits with their parts.

Stainless liners are often paired with insulation, either a wrap or a poured mix, which keeps flue gases warm and can be required for clearance to combustibles. A cap and top plate finish the job at the top of the chimney. In New Hope, a stainless liner is a common upgrade when installing an insert or wood stove.

Related service

Chimney Relining New Hope, PA

Relining means putting a new liner into a chimney that has an old, damaged or missing one. It is often recommended after a chimney fire, when clay tiles crack, or when a new appliance needs a different flue size. Relining is usually far less disruptive than rebuilding the chimney.

Have a list of everything that uses the chimney ready when you call (267) 714-1009. A furnace replaced with a high efficiency model that vents through the wall can leave the water heater alone in an oversized flue, which leads to poor draft and condensation. Relining with the right size solves the draft and moisture problems.

Local help

Chimney Liner Installation Near Me

Around New Hope, relining usually comes up when a home changes heating appliances or an inspection turns up cracked tiles. Across New Hope and nearby towns such as Newtown Grant, Newtown, Doylestown and Richboro, long heating seasons and repeated freeze and thaw cycles are hard on clay tile and mortar, and a new liner is often the safest long term fix.

For chimney liner installation in New Hope, PA or nearby towns like Newtown Grant, Newtown, Doylestown and Richboro, call (267) 714-1009 to reach a chimney sweep who covers your street.

What the local climate does to a chimney

Winters here are long and cold, and the heating season usually runs from October well into April. The hardest thing on brick here is not the cold itself but the constant swing above and below freezing: water soaks into brick, mortar joints and the crown on a mild day, freezes overnight and expands, which is how cracks, loose bricks and leaks start. Nor'easters drive rain sideways into flashing and mortar that looked fine in summer. That is why chimney cleaning in New Hope is usually booked in the fall, before the first cold night.

Why call

Why not wait

Less damage

Small chimney problems caught early usually stay small repairs.

Local knowledge

Chimney sweeps in New Hope know the chimneys and fireplaces common in local homes.

Know what happens next

Ask the sweep about the cause, the options and the estimate before work starts.

Common questions about chimney liner installation

Should I replace clay flue tiles with stainless?
Clay tiles were the standard in many older chimneys, and they hold up well until they crack. Stainless steel liners are installed later, from the top, and are used to reline chimneys whose tiles are damaged or missing. Minor tile damage can sometimes be repaired instead.
What does a chimney liner do?
Chimney liners keep heat and gases inside the flue, away from wood framing and the brick itself. Fire codes and safety standards expect chimneys serving fireplaces and appliances to be lined. An inspection shows whether your current liner is in good shape.
Can an insert vent into an existing chimney without a liner?
An insert should vent into a properly sized liner, not just into the open smoke chamber. Venting an insert into an oversized clay flue leads to poor draft and heavy creosote. The sweep sizes the liner from the insert specifications.
How long will a new chimney liner hold up?
A stainless steel liner is a long term fix when it suits the fuel and is kept clean. Burning dry wood and having the liner inspected regularly protect it. The liner manufacturer usually gives guidance on care.
Why does my water heater flue need relining after a furnace upgrade?
An orphaned water heater is one left venting alone into a chimney that used to serve both it and the furnace. A big flue with little heat going up it leads to backdrafting and moisture damage. Relining with the right size solves the problem, and CO alarms are a must.

More questions? Call (267) 714-1009

Often needed together

  • Chimney Liner Repair

    Restoring a damaged chimney liner with resurfacing, joint repair or partial replacement.

    Learn more
  • Chimney Inspection

    A top to bottom check of the chimney, inside and outside so you know whether it is safe to light a fire.

    Learn more
  • Fireplace Insert Installation

    Installing wood, gas and pellet inserts in existing fireplaces, so more heat stays in the room instead of going up the flue.

    Learn more
  • Wood Stove Installation

    Wood stove installation into an existing chimney or a new insulated chimney, with stovepipe, liner or chimney sized to the stove.

    Learn more

Looking for something else?

See all chimney services

Get chimney liner installation help in New Hope

Call now for New Hope chimney liner installation and help in the towns around it.

(267) 714-1009

Free to call. No forms to fill out.

Call (267) 714-1009